SCP STAINLESS STEEL SADDLES
Made to the highest standards SCP Stainless Steel
saddles are the ideal way to take a service
connection from an existing or new water 
distribution main. The product is suitable for use
on any type of pipeline material.

The saddle, straps and bolts are manufactured
entirely of grade 304 stainless Steel.  All 
internal surfaces are bonded with WRAS
BS 6920 approved Nitrile rubber suitable for all 
potable water applications. The rubber lining means that none of the stainless
steel is in direct contact with the with the pipe ensures a firm none slip grip on
the mounting pipeline, as well as a perfect watertight seal around the outlet
at up to 16 Bar pressure.

The saddles are available with one or two straps depending on the size of 
the outlet required, or the diameter of the mounting pipe.

Single Strap for pipe sizes 50mm-600mm NB 
The finger bracket saddle incorporate a female threaded sleeve to
accommodate the securing bolt, which means that only a single access point
is required when fixing the saddle into position on the pipe. The stainless 
steel runs on a Delrin washer and the thread is coated in blue Teflon to 
prevent seizure.

Double Strap for pipe sizes 600mm-1000mm NB
On the double strap option the finger bracket saddle has a stainless steel
threaded rod welded to it, again the thread is blue Teflon coated. To fit
the saddle the threaded rod is passed though the mating hole on the strap
and secured with a stainless steel nut and Delrin washer. 

Sizes 
The range is available in sizes to suit pipelines with a 50mm-1000mm 
NB with outlets from ¼-2½ inch BSP. Each saddle will accommodate
many different types of pipeline material, having a wide radial tolerance
of approximately 20mm depending on the diameter of the pipe.